3-7-3
Noise Filtering
Configuring Input Noise Filter Counters
For the purpose of suppressing noise on the signal lines A and B of every Counter a Noise Filter is
available. A Noise Filter can be configured for Counter 1 & 2.
Name of device variable
for CJ-series Unit
*_NoiseFltCntCfg
Configuring Noise Filter Digital Inputs
For the purpose of suppressing noise on the control lines of the Digital Inputs also a Noise Filter is
available. A Noise Filter can be configured for Digital Input 0 & 1.
Name of device variable
for CJ-series Unit
*_NoiseFltInCfg
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
Type
Name
UINT
Input Noise Filter
Counters
Type
Name
UINT
Input Noise Filter Digi-
tal Inputs
3 Operation and Configuration
Function
Selects the Counter 1 and 2 noise filter.
0: 50 kHz
1: 500 kHz
2: 10 kHz
Function
Selects the Digital Input 0 and 1 noise filter.
0: 50 kHz
1: 10 kHz
3
3-43