Set Magnetic Stripe Coercivity From The Lcd Menu - DataCard CE870 User Manual

Set Magnetic Stripe Coercivity from the LCD Menu

The setting for coercivity can be changed from the LCD panel, if needed. Usually, coercivity is a
system-wide decision and does not change.
1.
Enter the menu system.
a.
Press the U
Suspended displays on line 1 of the LCD panel.
b.
Press E
c.
Press the down arrow key until Configuration displays on
line 2 of the LCD panel.
d.
Press E
2.
Set Magnetic Stripe Coercivity.
a.
Press the down arrow key until Magstripe displays on
line 2 of the LCD panel.
b.
Press E
c.
Press the down arrow key until Coercivity displays on line 2
of the LCD panel.
d.
Press E
i.
Press an arrow key to display the intended coercivity.
ii.
Press E
iii.
Press E
iv.
The printer saves the value and returns to the
Magstripe menu.
Press E
CE870 Instant Issuance System User's Guide
button.
SER
to enter the menu system.
NTER
to enter the Configuration menu.
NTER
to enter the Magstripe menu.
NTER
to enter the Coercivity menu.
NTER
. Apply displays on line 2 of the LCD panel.
NTER
to save the value.
NTER
to exit the Magstripe menu.
NTER
31