Clean The Printer - DataCard CE870 User Manual

6.
Open the multi-hopper door and remove any
unprinted cards.
7.
Open the cleaning card packages, remove the
cards, and insert the cleaning cards into the
hoppers. (Plan to run the cleaning cycle
immediately. The cleaning cards dry out if
they are out of the package for more than a
few minutes.)
8.
Close the multi-hopper door and lock the
printer. The front panel displays Ready and
the U button shows steady green.
SER

Clean the Printer

1.
Make sure that you have prepared the printer for cleaning. Refer to
Cleaning" on
2.
Enter the menu system.
a.
Press the U
Suspended displays on line 1 of the LCD panel.
b.
Press E
3.
Enter the Cleaning Card menu.
a.
Maintenance displays on line 2 of the LCD panel. Press
E to enter the Maintenance menu.
NTER
b.
Cleaning Card displays on line 2 of the LCD panel. Press
E to enter the Cleaning Card menu.
NTER
4.
Printer displays on line 2 of the LCD panel. Press E
5.
Start displays on line 2 of the LCD panel. Press E
the cleaning process.
46
page 45
button.
SER
to enter the menu system.
NTER
"Prepare the Printer for
.
NTER
to start
NTER
System Maintenance