130: Embosser Card Entry Jam; 131: Embosser Card Exit Jam; 132: Embosser Card Stack Full; 133: Embosser Card Reject Full - DataCard CE870 User Manual

130: Embosser card entry jam

The card path is blocked in the embosser.
1.
Open the embosser and remove the supply cartridges.
2.
Remove any cards found.
3.
Replace the cartridges, and then close and lock the embosser.
H & T
INTS IPS
Refer to "Embosser Card Jam"

131: Embosser card exit jam

The card path is blocked in the embosser.
1.
Open the embosser and remove the supply cartridges.
2.
Remove any cards found.
3.
Replace the cartridges, and then close and lock the embosser.
H & T
INTS IPS
Refer to "Embosser Card Jam"

132: Embosser card stack full

The embosser output hopper is full or blocked.
Remove cards from the printer output hopper.

133: Embosser card reject full

The embosser reject tray is full.
1.
Open the embosser and empty the reject tray.
2.
Close and lock the embosser.
H & T
INTS IPS
The embosser reject tray holds five cards. Empty it regularly to avoid receiving the message. Refer
to "Empty the Embosser Reject Tray"
CE870 Instant Issuance System User's Guide
on page 61 for more information.
on page 61 for more information.
on page 50.
77