Avaya 1165E User Manual page 270

Advanced features
Figure 70: Sample failure message for File Manager operation
Copying the ring tone from the IP Deskphone to the USB drive
1. Log into the IP Deskphone and plug the USB flash drive into the USB port of the IP
2. Press the Services hard key and choose File Manager.
3. Select the IP Deskphone from the Select Device screen.
4. Navigate to the Sounds folder.
5. Select the file you require and press Send.
6. Navigate to the folder MyRings and press Done to start the operation.
Copy errors:
If file copying cannot complete due to insufficient space on the USB device, or due to the
selected file type not being enabled in the File Manager (device configuration), then an error
message is displayed on the screen.
270 Avaya 1165E IP Deskphone with SIP Software User Guide
Deskphone.
The contents of their IP Deskphone are displayed.
You are prompted to select the destination folder on the plugged-in USB drive.
The file is then validated (some files are not allowed to copy) and sent to the selected
destination. After the copy is complete, a message appears on the phone screen
displaying that the file was copied successfully.
Comments? infodev@avaya.com
November 2013