Avaya 1165E User Manual page 43

Figure 9: Cable routing tracks and mounting holes
Complete these steps, as needed, before you wall-mount your IP Deskphone:
Method A:
1. Press the wall-mount lever, and pull the IP Deskphone away from the stand, as
2. Use the stand cover (the part you removed in
Avaya 1165E IP Deskphone with SIP Software User Guide
shown in the following figure.
Figure 10: Rotate the IP Deskphone into the wall mount position
page 39), to mark the wall-mount holes by pressing the bottom of the stand cover
Connecting the components
Removing the stand cover
November 2013
on
43