Operation and Maintenance
Adjusting Local Panel
Preferences
Displaying the Setup Local
Panel Screen
2-60
Key Operators can change the following Local Panel properties:
• Volume of "beep" that sounds when you touch any button
• Backlight intensity
• Audible alarm volume
• Audible alarm - enable or disable
A Key Operator passcode is required to change these properties.
You make all changes to the Local Panel properties from the Setup Local
Panel screen. To navigate to this screen:
1. On the Home screen, touch Menu.
2. On the Main Menu screen, touch Setup Imager.
3. When the system prompts to start the Installation Assistant, touch
No.
4. Highlight Local Panel and touch Select.
7F3319
October 4, 2004