Selecting N_Event Reporting - Kodak DryView 8150 User Manual

Selecting N_Event
Reporting
October 4, 2004
"N_Events" are status changes at the Imager, such as changes from "ready"
to "busy." The Imager can be configured to report these status changes to
the modality as they changes occur.
CAUTION
:
This feature can cause a serious malfunction in the modality
if it is not designed or configured to accept N_Event
messages. Leave the N_Event reporting attribute set to false
unless you are certain the modality can accept N_Event
messages.
1. On the Advanced defaults screen, highlight N_Event reporting.
2. Touch Select to display the Edit DICOM attribute screen.
3. Use the Select button to choose true or false. Selecting true enables
the Imager to send N_Event messages to the modality.
4. For most installations Override modality should be left at false.
NOTE: If you select true for Override modality, the "N_Event
Reporting" value set in step
request from the modality.
5. Touch the Back arrow to return to the Advanced defaults screen.
7F3319
Adding a Modality
3 will take precedence over any
4-17