Preventive Maintenance - Kodak DryView 8150 User Manual

Preventive
Maintenance
October 4, 2004
5. Pull the retaining clip forward and down to lock the filter in place.
6. Close the front door.
7. Change the Filter Change Date in the Service log.
a. On the Home screen touch Menu.
b.Touch Service.
c. Touch Filter Change and then Yes.
The current date is entered into the log as the Filter Change Date.
To maintain optimum performance from the Laser Imager, Kodak recommends that
preventive maintenance be performed periodically by an Authorized Service Provider
of Kodak products.
Preventive Maintenance includes:
• Installation of a new charcoal filter
• Image assembly cleaning
• Film processor cleaning
You can monitor the number of prints remaining until PM is due by viewing the Print
Counts screen. (See "Print Counts Screen" on page
reaches the preset limit, "Preventive Maintenance" appears on the Home screen.
Call Service to schedule preventive maintenance (see
page 3-17).
When preventive maintenance is performed, the "Prints to PM" count is reset to zero
and the Preventative Maintenance Notice no longer appears on the Status screen.
7F3319
Operation and Maintenance
2-28.) When the print count
"Calling for Support" on
2-69