Removing Film Jams From Area 4 - Kodak DryView 8150 User Manual

Troubleshooting

Removing Film Jams from Area 4

Processor
Drum
Area 4
Plastic Thumb
3-14
Area 4 includes the film processor.
When a jam occurs in this area all films in the Imager must be removed.
Tab
Jam Area 4
1. Open the hood.
2. Release the two clamps at the left of the processor and open the drum
CAUTION
:
Drum and rollers inside the processor are hot. Exercise
caution when removing jammed film from the processor.
cover. (See the following figure).
CAUTION
:
To prevent damage to the surface of the processor drum, do
not use any type of tool to remove jammed film.
7F3319
H200_0008da
October 4, 2004