SET1300000
13 Installing eLCM Activation License
36
The installation of Micro SD which is a component of eLCM Activation License will be explained.
Installation of license key is a responsible task of the system administrator.
This is not the scope of the expansion work.
This chapter shows the installation procedure of Micro SD.
SET1301000
13.1 Conditions for installing components
- Can be installed on BMM Board installed in SB#0.
SET1301010
13.1.1 Firmware version
- No conditions.
SET1301020
13.1.2 Maximum installation amount
- 1 unit.
SET1301030
13.1.3 Conditions concerning combined use of Micro SD
- No conditions.
SET1301040
13.1.4 Base Unit state
- AC power to the Base Unit is off.
84