Table of Contents
Advertisement
SET0402000
4.2 Work Items, Work Assignment, and Work Time
"Table 4.2" lists the work items, standard work time, and the person in charge of these types of work.
Work item
Checking the delivered items
Installing option
Verifying operation
Preparation of handing over to
the System Administrator
Handover to the system administrator
SET0403000
4.3 Procedure for installing Memory
SET0403010
4.3.1 Checking the delivered items
(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The specifications and version level of units delivered separately due to delivery considerations
are available for the target functions.
(2) Proceed to the net procedure according to the following procedures.
→ When installing the existing SB.
Proceed to
→ When installing the new SB.
Proceed to
SET0403020
4.3.2 Installing option (Existing SB)
Install according to the following procedures.
ANNT)
- The installation location and quantity have to indicate by the system administrator.
- Confirm connecting position of power cable of the Base Unit beforehand.
(1) Turn off AC power of the Base Unit.
(2) Remove the SB that installs memory.
See Appendix F.2.2
"4.3.2 Installing option (Existing
"4.3.3 Installing option (New
"Removing
SB".
Table 4.2
Person in charge
Service engineer
Service engineer
Service engineer
Service engineer
System administrator and
Service engineer
SB)" .
SB)".
32
Work time
(minute)
5
5
15
1
5
Advertisement
Table of Contents
