Table of Contents
Advertisement
(8) Make sure that the Alarm indicator of the DU_SAS is not lit. (See "Figure 6.3.2").
(9) Proceed to
SET0604000
6.4 Verifying operation
Confirm the DU_SAS according to the following procedures.
(1) Connect the operation terminal.
See Appendix E.1
(2) Log in to the iRMC S5 Web from the operation terminal.
See Appendix E.2.1 "Login".
(3) Start Video Redirection.
See Appendix E.3.1
(4) Set "BIOS Setup" at "Boot Device Selector".
See Appendix E.4
(5) Turn on the system power.
See Appendix E.5.1
→ Wait for a few minutes until "Figure 6.4-1" is displayed. (Max. 10 minutes)
"6.4 Verifying
operation".
"Operation terminal
"Video Redirection
"Boot Device Selector
"Power
On".
Figure 6.3.2
connection".
start".
setting".
48
Advertisement
Table of Contents
