(7) Proceed to
SET1204000
12.4 Verifying operation
Confirm the M.2 Flash Device according to the following procedures.
(1) Connect the operation terminal.
See Appendix E.1
(2) Log in to the iRMC S5 Web from the operation terminal.
See Appendix E.2.1 "Login".
(3) Start Video Redirection.
See Appendix E.3.1
(4) Set "BIOS Setup" at "Boot Device Selector".
See Appendix E.4
(5) Turn on the system power.
See Appendix E.5.1
→ Wait for a few minutes until "Figure 12.4-1" is displayed. (Max. 10 minutes)
"12.4 Verifying
operation".
"Operation terminal
"Video Redirection
"Boot Device Selector
"Power
On".
Figure 12.3.2
connection".
start".
setting".
81