Dell PowerConnect J-EX4200-24T Software Manual page 1928

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 226: show isis overview Output Fields (continued)
Field Name Field Description
Overload bit at startup Overload bit capability is enabled.
is set
Overload high metrics capability:
Overload high metrics
Time period after which overload is reset and the time that remains before the timer is set to expire.
Overload timeout
Traffic engineering Traffic engineering capability:
Restart Graceful restart capability:
Time period for complete reacquisition of IS-IS neighbors.
Restart duration
Graceful restart helper capability:
Helper mode
IS-IS level:
Level
IP Protocol version 4 capability is enabled.
IPv4 is enabled
IP Protocol version 6 capability is enabled.
IPv6 is enabled
OSI CLNP Protocol capability is enabled. (J Series routers only)
CLNS is enabled
Internal route Preference value of internal routes.
preference
Preference value of external routes.
External route
preference
Wide area metrics capability is enabled.
Wide area metrics are
enabled
Narrow metrics capability is enabled.
Narrow metrics is
enabled
show isis overview show isis overview
Sample Output
1856
enabled
enabled
—Level 1 information
1
2 —Level 2 information
user@host> show isis overview
Instance: master
Router ID: 192.168.1.220
Adjacency holddown: enabled
Maximum Areas: 3
LSP life time: 65535
Attached bit evaluation: enabled
SPF delay: 200 msec, SPF holddown: 5000 msec, SPF rapid runs: 3
Overload bit at startup is set
Overload high metrics: disabled
or .
enabled disabled
or disabled .
or disabled .
or .
enalbed disabled