Chapter 70 Layer 3 Protocols—Overview - Dell PowerConnect J-EX4200-24T Software Manual

CHAPTER 70
Layer 3 Protocols—Overview
Layer 3 Protocols Supported on J-EX Series Switches
Table 187: Supported Junos OS Layer 3 Protocol Statements and Features
Protocol Notes
BGP Fully supported.
BFD Fully supported.
ICMP Fully supported.
IGMPv1, v2 and v3 Fully supported.
IS-IS Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on J-EX Series Switches"
on page 14.
MPLS Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on J-EX Series Switches"
on page 14.
Layer 3 Protocols Supported on J-EX Series Switches on page 1421
Layer 3 Protocols Not Supported on J-EX Series Switches on page 1422
Understanding Distributed Periodic Packet Management on J-EX Series
Switches on page 1424
Understanding VRRP on J-EX Series Switches on page 1425
Understanding IPsec Authentication for OSPF Packets on J-EX Series
Switches on page 1428
J-EX Series switches support the Junos OS Layer 3 features and configuration statements
listed in Table 187 on page 1421:
For More Information
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Multicast Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS MPLS Applications Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
.
.
.
.
.
1421