Dell PowerConnect J-EX4200-24T Software Manual page 1578

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
Related
Documentation
bgp
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1506
no-adaptation —Specify for BFD sessions not to adapt to changing network conditions.
We recommend that you not disable BFD adaptation unless it is preferable not to
have BFD adaptation enabled in your network.
transmit-interval threshold milliseconds
transmit interval adapts to a value greater than the threshold, a single trap and a
single system log message are sent. The interval threshold must be greater than the
minimum transmit interval.
Range: 0 through 4,294,967,295
transmit-interval minimum-interval milliseconds
the local routing device transmits hello packets to a neighbor with which it has
established a BFD session.
Range: 1 through 255,000
version —Configure the BFD protocol version to detect.
Range: 1 or
automatic
Default: (autodetect the BFD protocol version)
automatic
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Bidirectional Forwarding Detection
Configuring BFD Authentication for Static Routes
bgp { ... }
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit protocols],
[edit routing-instances routing-instance-name protocols]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Enable BGP on the routing device or for a routing instance.
BGP is disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling BGP
—Configure a threshold. When the BFD session
—Configure the minimum interval at which