Dell PowerConnect J-EX4200-24T Software Manual page 1508

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 191: OSPF Routing Configuration Summary
Field Function
General tab
Area Id Uniquely identifies the
area within its AS.
Area Ranges Specifies a range of IP
addresses for an area
when sending summary
link advertisements
(within an area).
1436
Select Configure > Routing
1.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes (J-Web Procedure)"
on page 334 for details about all commit options.
Click one:
2.
—Adds an OSPF area. Enter information into the configuration page as described
Add
in Table 191 on page 1436.
—Modifies an existing OSPF area. Enter information into the configuration page
Edit
as described in Table 191 on page 1436.
Delete —Deletes an existing OSPF area.
To modify OSPF global settings, click
3.
192 on page 1438.
To disable OSPF, click Disable.
4.
Your Action
Type a 32-bit numeric identifier for the area. Type an integer or select and edit
the value.
If you enter an integer, the value is converted to a 32-bit equivalent. For example,
if you enter 3, the value assigned to the area is
To add a range:
1. Click
Add
2. Type the area range.
3. Specify the subnet mask.
4. To override the metric for the IP address range, type a specific metric value.
5. If you do not want to display the routes that are contained within a summary,
select Restrict advertisements of this area range
6. If you want a summary of a route to be advertised only when an exact match
is made with the configured summary range, select
advertisement of this area range
7. Click
OK
To modify an existing area range, select the area range, click
value. Click
To delete an area range, select the area range and click
> OSPF .
Commit Options
. Enter information as described in Table
Edit
.
.
.
.
OK
> Commit . See "Using the
.
0.0.0.3
.
Enforce exact match for
, and edit the
Edit
Delete .