Dell PowerConnect J-EX4200-24T Software Manual page 1800

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
1728
request —RIP information packets such as request, poll, and poll entry packets
—RIP triggered updates
trigger
—RIP update packets
update
Global Tracing Options
all —All tracing operations
general —A combination of the
—All normal operations
normal
Default: If you do not specify this option, only unusual or abnormal operations are traced.
policy —Policy operations and actions
route —Routing table changes
—State transitions
state
—Routing protocol task processing
task
—Routing protocol timer processing
timer
—(Optional) Modifier for the tracing flag. You can specify one or more of
flag-modifier
these modifiers:
—Provide detailed trace information
detail
—Packets being received
receive
receive-detail —Provide detailed trace information for packets being received
send —Packets being transmitted
—Provide detailed trace information for packets being transmitted
send-detail
—(Optional) Prevent any user from reading the log file.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB) or megabytes
size size
(MB). When a trace file named
When the again reaches its maximum size,
trace-file
and trace-file is renamed
maximum number of trace files is reached. Then, the oldest trace file is overwritten.
If you specify a maximum file size, you must also specify a maximum number of trace
files with the files option.
Syntax: xk to specify KB,
Range: 10 KB through the maximum file size supported on your system
Default: 128 KB
—(Optional) Allow any user to read the log file.
world-readable
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
normal and route trace operations
reaches this size, it is renamed
trace-file
trace-file.0 . This renaming scheme continues until the
xm to specify MB, or xg to specify GB
trace-file.0
is renamed
trace-file.0 trace-file.1
.