Dell PowerConnect J-EX4200-24T Software Manual page 1654

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1582
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Enable OSPF routing on a routing device interface.
You must include at least one
on the routing device.
interface-name —Name of the interface. Specify the interface by IP address or interface
name for OSPFv2, or only the interface name for OSPFv3. Using both the interface
name and IP address of the same interface produces an invalid configuration. To
configure all interfaces, you can specify
produces an invalid configuration. For details about specifying interfaces, see interface
naming in the Junos OS Network Interfaces Configuration Guide.
NOTE: For nonbroadcast interfaces, specify the IP address of the
nonbroadcast interface as
The remaining statements are explained separately.
NOTE: You cannot run both OSPF and
two routing devices.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
neighbor
Minimum OSPF Configuration
Configuring Multitopology Routing in OSPF
Configuring Multiple Address Families for OSPFv3
statement in the configuration to enable OSPF
interface
all . Specifying a particular interface and
interface-name .
ethernet-tcc
all
encapsulation between