Dell PowerConnect J-EX4200-24T Software Manual page 2006

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 244: Communities Output Field Values
Value
area-number
bandwidth: local AS
number:link-bandwidth-number
domain-id
domain-id-vendor
link-bandwidth-number
local AS number
options
origin
ospf-route-type
rte-type
route-type-vendor
target
unknown IANA
unknown OSPF vendor
community
1934
Table 244 on page 1934 describes the possible values for the
Description
4 bytes, encoding a 32-bit area number. For AS-external routes, the value is
identifies the route as internal to the OSPF domain, and as within the identified area. Area
numbers are relative to a particular OSPF domain.
Link-bandwidth community value used for unequal-cost load balancing. When BGP has
several candidate paths available for multipath purposes, it does not perform unequal-cost
load balancing according to the link-bandwidth community unless all candidate paths have
this attribute.
Unique configurable number that identifies the OSPF domain.
Unique configurable number that identifies the OSPF domain.
Link-bandwidth number: from
Local AS number: from
1 byte. Currently this is only used if the route type is
the field indicates that the route carries a type 2 metric.
(Used with VPNs) Identifies where the route came from.
1 byte, encoded as or
1 2
type 1 or a type 2 LSA); 3
for NSSA routes; or
7 129
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Displays the area number, OSPF route type, and option of the route. This is configured using
the BGP extended community attribute
area-number:ospf-route-type:options
Defines which VPN the route participates in;
number . For example, 10.19.0.0:100
Incoming IANA codes with a value between
community attribute is accepted, but it is not recognized.
Incoming IANA codes with a value above
attribute is accepted, but it is not recognized.
through
0 4,294,967,295
through .
1 65,535
5
for intra-area routes (depending on whether the route came from a
for summary routes; 5 for external routes (area number must be
for sham link endpoint addresses.
. The format is
0x0306
.
. The format is
0x8000
.
has the format
target
.
0x1 and
0x8000 . This code of the BGP extended community
Communities output field.
. A nonzero value
0
(bytes per second).
or . Setting the least significant bit in
7
32-bit IP address:16-bit
0x7fff . This code of the BGP extended
0 );