Dell PowerConnect J-EX4200-24T Software Manual page 2060

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
List of Sample Output
Output Fields
show route protocol show route protocol
access access
1988
rsvp —Resource Reservation Protocol
—Local route target virtual private network
rtarget
—Statically defined route
static
—Dynamic tunnel
tunnel
—Virtual private network
vpn
NOTE: J-EX Series switches run a subset of these protocols. See the
switch CLI for details.
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route protocol access on page 1988
show route protocol access-internal extensive on page 1989
show route protocol bgp on page 1989
show route protocol bgp detail on page 1989
show route protocol bgp extensive on page 1989
show route protocol bgp terse on page 1990
show route protocol direct on page 1990
show route protocol l2circuit detail on page 1990
show route protocol l2vpn extensive on page 1991
show route protocol ldp on page 1992
show route protocol ldp extensive on page 1992
show route protocol ospf (Layer 3 VPN) on page 1993
show route protocol ospf detail on page 1994
show route protocol rip on page 1994
show route protocol rip detail on page 1994
show route protocol ripng table inet6 on page 1994
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route protocol access
inet.0: 30380 destinations, 30382 routes (30379 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
13.160.0.3/32 *[Access/13] 00:00:09
> to 13.160.0.2 via fe-0/0/0.0
13.160.0.4/32 *[Access/13] 00:00:09
> to 13.160.0.2 via fe-0/0/0.0
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical