Dell PowerConnect J-EX4200-24T Software Manual page 1510

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 191: OSPF Routing Configuration Summary (continued)
Field Function
Export Policy Specifies one or more
policies to control which
summary LSAs are
flooded into an area.
Table 192: Edit OSPF Global Settings
Field Function
General tab
Router Id Specifies the ID for the routing device.
RIB Group Installs the routes learned from OSPF routing
instances into routing tables in the OSPF routing
table group.
Internal Route Specifies the route preference for internal
Preference groups.
External Route Specifies the route preference for external
Preference groups.
Graceful Restart Configures graceful restart for OSPF.
SPF Options Configure options for running the
shortest-path-first (SPF) algorithm. You can
configure a delay for when to run the SPF
algorithm after a network topology change is
detected, the maximum number of times the
SPF algorithm can run in succession, and a
hold-down interval after the SPF algorithm runs
the maximum number of times.
1438
Your Action
Click Add to add an export policy.
Click Move up or Move down to move the selected policy up or down the list of
policies.
Click to remove an export policy.
Remove
Your Action
Type or select and edit the value.
Select a value.
Type or select and edit the value.
Type or select and edit the value.
To configure graceful restart:
1.
2. Specified the estimated time to reacquire a full
3. To disable
4. To disable graceful restart helper capability, select
5. Click
To configure SPF:
1.
2. Specify the time interval to hold down, or wait
3. Specify the maximum number of times the SPF
Specify the estimated time to send out purged grace
LSAs over all the interfaces.
OSPF neighbor from each area.
No Strict LSA Checking
box.
the check box. Helper mode is enabled by default.
OK .
Specify the time interval between the detection of
a topology change and when the SPF algorithm
runs.
before a subsequent SPF algorithm runs after the
SPF algorithm has run the configured maximum
number of times in succession.
algorithm can run in succession. After the maximum
is reached, the hold-down interval begins.
, select the check