Dell PowerConnect J-EX4200-24T Software Manual page 1951

Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 231: show ospf database Output Fields
Field Name Field Description
area Area number. Area
Type Type of link advertisement:
or
Summary
LSA identifier included in the advertisement. An asterisk preceding the identifier
ID
marks database entries that originated from the local routing device.
Adv Rtr Address of the routing device that sent the advertisement.
Seq Link sequence number of the advertisement.
Age Time elapsed since the LSA was originated, in seconds.
Checksum value of the LSA.
Cksum
instance instance-name —(Optional) Display all OSPF database information under the
named routing instance.
link-local —(Optional) Display information about link-local LSAs.
logical-system (all | logical-system-name)
systems or on a particular logical system.
lsa-id lsa-id —(Optional) Display the LSA with the specified LSA identifier.
—(Optional) Display summary network LSAs.
netsummary
—(Optional) Display information about network LSAs.
network
nssa —(Optional) Display information about not-so-stubby area (NSSA) LSAs.
—(Optional) Display opaque area-scope LSAs.
opaque-area
—(Optional) Display information about router LSAs.
router
view
clear (ospf | ospf3) database on page 1748
show ospf database on page 1880
show ospf database brief on page 1881
show ospf database detail on page 1881
show ospf database extensive on page 1882
show ospf database summary on page 1884
Table 231 on page 1879 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
0.0.0.0 is the backbone area.
ASBRSum
.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
, Extern , Network , NSSA , OpaqArea
command.
show ospf database
Level of Output
All levels
, Router , All levels
All levels
All levels
All levels
All levels
All levels
1879