Dell PowerConnect J-EX4200-24T Software Manual page 1454

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
1382
port-information-state-machine
port-migration-state-machine
port-receive-state-machine
port-role-select-state-machine
port-role-transit-state-machine
port-state-transit-state-machine
port-transmit-state-machine
—Trace the state and events for the ppmd process
ppmd
state-machine-variables
timers —Trace protocol timers
topology-change-state-machine
no-stamp —(Optional) Do not place timestamp information at the beginning of each line
in the trace file.
Default: If you omit this option, timestamp information is placed at the beginning of
each line of the tracing output.
—(Optional) Prevent aney user from reading the log file.
no-world-readable
replace —(Optional) Replace an existing trace file if there is one.
Default: If you do not include this option, tracing output is appended to an existing trace
file.
—(Optional) Maximum size of each trace file, in kilobytes (KB) or megabytes
size size
(MB). When a trace file named
When the
.0. trace-file
and
trace-file .1 trace-file
until the maximum number of trace files is reached. Then the oldest trace file is
overwritten.
If you specify a maximum file size, you must also specify a maximum number of trace
files with the option.
files
Syntax: to specify KB,
xk
Range: 10 KB through the maximum file size supported on your system
Default: 1 MB
world-readable —(Optional) Allow any user to read the log file.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
—Trace the port information state machine.
—Trace the port migration state machine.
—Trace the port receive state machine.
—Trace the port role selection state machine.
—Trace the port role transit state machine.
—Trace the port state transit state machine.
—Trace the port transmit state machine
—Trace when the state machine variables change
—Trace the topology change state machine.
reaches this size, it is renamed
trace-file
again reaches its maximum size,
is renamed
trace-file .0
to specify MB, or to specify GB
xm xg
trace-file
is renamed
trace-file .0
. This renaming scheme continues