Wireless Transactions; Smart Card Transaction; Magnetic Card Reader Use - VeriFone omni 5 series Installation Manual

Wireless
Transactions
Smart Card
Transaction
To Conduct a Smart
Card Transaction
CAUTION
Magnetic Card
Reader Use
To Conduct a Credit/
Debit Card
Transaction
To conduct a wireless transaction:
•
Ensure the terminal is in an optimal position for transmitting.
•
Follow the on-screen instructions provided with your application.
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3
Remove the card only when the application indicates the transaction is
complete.
Figure 29 Inserting a Smart Card
Leave the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.
x x
The V 5xx/V 6xx supports credit/debit card transactions.
1
Position a magnetic card with the stripe in the card reader and facing inward,
toward the keypad.
2
To ensure a proper read of the magnetic swipe card, the user should insert the
magnetic card from the top of the unit, as shown in
T
ERMINAL

Wireless Transactions

Figure 29).
Figure 30.
X X
V 5 /V 6 I G
XX XX NSTALLATION
S
ETUP
33
UIDE