Establishing Telephone Line Connections; Installing A Paper Roll In The Printer - VeriFone VX 520 Installation Manual

T S
ERMINAL ETUP
VX 520 Setup
Establishing
Telephone Line
Connections
WARNING
Installing a Paper
Roll in the Printer
CAUTION
22
VX 520 I
NSTALLATION
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
the line is dedicated to the terminal.
Figure 7 VX 520 Direct Telephone Connection
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
Before you can process transactions that require a receipt or record, you must
install paper in the printer.
The VX 520 uses a roll of single-ply, thermal-sensitive paper for either the 38 mm-
or the 49 mm-diameter version.
A pink out-of-paper indicator line appears on the edge of the paper approximately
18 inches before the end of the roll. After this line appears, there is enough paper
remaining on the roll to conclude at least one transaction.
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality VeriFone paper, refer to
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
G
UIDE
Figure
RJ-11
Accessories and
7). This is a direct connection and
Documentation.