S
ETUP
Connection Ports
Connection
Ports
Cabling
Connections
Dedicated Micro-
USB Device Port
Connection
Micro-USB Host
Port Connection
C680 I
16
NSTALLATION
The terminal has one primary micro-USB port on the side used for power and
download.
There is another micro-USB connector USB Host located at the back of the
terminal for peripheral connection. Powered RS-232 is supported via RJ11 for
modem connection, and via a 4-pin connector debug and OS download.
Figure 8
Connection Ports
The following are cabling scenarios on your unit:
Dedicated Micro-USB Device Port Connection
1
Micro-USB Host Port
2
Powered RS-232/4-Pin
3
Powered RS-232/RJ11 Connection
4
The micro-USB Device port on the side of the unit is dedicated to download/power
charging. Insert the micro-USB plug end of the Host connector cable to the micro-
USB port on the terminal to connect.
Figure 9
Dedicated Micro USB Device Port
The micro-USB Host port on the back of the unit is used for connecting peripheral
devices. Insert the micro-USB plug end of the pheriperal cord to the micro-USB
port on the back of the terminal to connect.
G
UIDE
4 PIN WIRE
Connection.
Connection.