Connection Ports; Connecting Cables And Other Devices - VeriFone M425 Installation Manual

NOTE
Connection
Ports
Connecting Cables
and other Devices
To connect M425
device to and
integrated kit:
NOTE
•
CTLS Reader - Contactless (CTLS) Reader has dedicated LEDs lower to the
left of the display for contactless payments. For directions on how to conduct
contactless transactions, see
Transaction.
•
4 white LEDs to support CTLS transaction function.
•
3 white LEDs to support MSR transaction function.
•
1 white LED to support SCR transaction function.
•
Audio Jack - A 3.5 mm audio jack to facilitate accessibility for the visually
impaired.
•
Microphone - the user can speak into the terminal microphone to state the
issue or ask a question.
•
Barcode Scanner - A barcode scanner to capture and read information
contained in a barcode.
•
K-Lock Slot - customer can buy any kind of K-lock in the market to use on
M425 device for physical security.
•
Telco Style Keypad - intuitive telco-style keypad with colored control keys,
interchangeably detects key presses from tactile keypad and touchscreen.
On screen PIN entry is NOT supported.
The device has one custom multiport interface for power and communication.
M425 device supports both integrated kit and Dongle with orange cable
connectivity.
1
Remove the back cover as shown below.
Figure 3 Removing Back Cover
Route the multiport cable through the back cover first, as shown in the picture.
Performing a Contactless Smart Card
S

Connection Ports

M425 I G
NSTALLATION UIDE
ETUP
16