Setting The Wireless Options - Denso BHT-1170BWB-CE User Manual

BHT-1170BWB-CE / BHT-1171BWB-CE

4.5.4 Setting the Wireless Options

Tap the Settings tab on the Wireless LAN menu to display the screen
shown at the right.
Power: Wireless module power save mode setting
CAM: Always ON
FastPSP: Power save mode (Default)
MaxPSP: Power save mode
When using the BHT with PSP mode set, set a low value (2
− Note −
or 3) for DTIM at the access point. It may not be possible to
reconnect to the access point if a larger value is set.
Radio mode:Radio mode setting
11b:
11b/g:
11b/g:
Advanced Settings
Tap the "Advanced Settings" button to display the screen shown at the
right.
Preamble: Preamble setting
Long: Long preamble (Default)
Short: Short preamble
If the preamble of the access point is set to short
− Note −
preamble, please set the same short preamble to the
BHT. The BHT may not connect to the access point if
long preamble is set in this case.
2.4GHz Roaming Level[dBm] : Roaming trigger level of 2.4GHz
-60 - -100[dBm] (Default：-80[dBm])
Roaming Beacon Lost : Beacon loss number to start roaming
WMM Support : enable or disable WMM function
Enable : Enable WMM
Disable : Disable WMM (Default)
Tap the [Default] button to change these parameters back to the default
92
Enable 802.11b connection (Default)
Enable 802.11b or 802.11g connection
Enable 802.11b or 802.11g connection or 802.11n [2.4 GHz band] connection