6.11.4. Communication Tes
If the ActiveSync/WMDC connection is established...
If the ActiveSync/WMDC connection fails...
If the ActiveSync/WMDC connection fails, the ActiveSync icon is not displayed in the task bar.
t
T
ap the 4:COM button in the Test menu to perform the communication
test for the USB interface port.
1:USB:
Performs the USB interface test.
Tap the 1:US
B butt
The BHT sta
rts con
ActiveSync/W
MDC.
The pop-up dialog on the
Tap the Hide
button
test.
If the ActiveSync/WMDC connection is established, the "Network Begin"
m
essage sounds and the ActiveSync/WMDC icon is displayed in the task
bar (red circle shown on the right).
- 129 -
on in
the CO
M men
u to
nectin
g to th
e host computer using
left is
displayed during connection.
to clo
se the
dialog
or
the Cancel button to cancel the
start the USB interface test.