Connecting To A Pbx; Specifying The Network Access Digit - VTech GEMINI User Manual

2.4ghz digital cordless phone system

Table of Contents

Connecting to a PBX

If your Vtech GEMINI cordless telephone is connected to a PBX telephone system, you may have to specify a network access digit

to seize an outside telephone line.

If the first digit of a phonenumber matches this network access digit than your Vtech GEMINI will insert a dial pause after this

network access digit.

Open the menu by pressing the «Menu» softkey.

Select the menu entry

Edit the digit according to the relevant PBX specifications and press the «OK»

softkey to confirm. The new digit is now stored.

Press the cancel key for approx. 2 seconds to return to the standby mode.

.....

•

Note

Please be aware that your Vtech GEMINI does not automatically insert

this network access digit before any specified telephone number !

•

For dialling from the Call Log through a PBX refer to page 19.

Settings

and press the «OK» softkey.

BS Settings

and press the «OK» softkey.

PBX code

and press the «OK» softkey.

Table of Contents