VTech GEMINI User Manual page 45

Editing/programming network service codes
Before using any of the supplementary network services please make sure that the correct codes are stored in the Vtech GEMINI.
Here is how you can verify and edit these codes:
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
softkey.
Select the menu entry
Now select the required network service form which you want to verify or
change the control code and press the «OK» softkey.
Edit the code according to the service provider specifications and press the
«OK» softkey to confirm. The new code is now stored.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
•
Note
To enter a flash character press the R-key
Network Mailbox / Voicebox
A special supplementary network service is the so-called 'Network Mailbox' or 'Network Voicebox'. This service acts as an automatic
answering machine very similar to the customary mailboxes for GSM telephones.
Please note that this is a supplementary network service and subject to availability from your service provider. Please ask your
service provider also about any charges/costs as well as a full description of the service functionality.
Your Vtech GEMINI supports this service by providing a quick dial function assigned to the
seconds (long-press) the telephone number of this network mailbox is automatically dialled.
•
Note
Make sure that the correct telephone number of your network mailbox
is programmed in your Vtech GEMINI. Refer to page 45 for details on
how to modify this special network control code.
•
In some cases your Vtech GEMINI will not display a text indicating that
you have new messages in your network mailbox. This may happen
when the communication protocol used by your service provider is not
compatible with the protocol supported in the Vtech GEMINI.
•
In order to control this network mailbox (listen to messages, record an
announcement, activate/de-activate the mailbox, etc.) you must send
appropriate control codes to this mailbox. Ask your service provider for
details.
Settings
and press the «OK» softkey.
Network services
Edit codes
and press the «OK» softkey.
and press the «OK»
key. When you press this key for 2