Editing The Handset Name; Select The Display Language; Select The Display Contrast - VTech GEMINI User Manual

Select the menu entry
Select the menu entry
Select the menu entry
Select the warning tone which you want to enable/disable and press the
«OK» softkey.
The current status is shown, e.g.
according to your preference.
Confirm with the «OK» softkey. The selected setting is stored.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
Note The key click setting applies also to all acknowledge tones (e.g. when
placing the handset back in the base station).

Editing the handset name

You can edit the name of the handset. This helps to identify the handset e.g. if you have more than one handset.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
You can now edit the name of this handset (max. 15 characters). Press the
key you delete the last character. Switch from uppercase to lowercase
characters by pressing
Press the «OK» softkey to confirm the changes.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....

Select the display language

For the display texts you can choose between several languages.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
Select the language of your choice and press the «OK» softkey.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....

Select the display contrast

For better display readability you can choose between 8 different display contrast levels.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Settings and press the «OK» softkey.
HS Settings
and press the «OK» softkey.
Warning tones and press the «OK» softkey.
Off . Change the setting
Settings and press the «OK» softkey.
HS Settings
and press the «OK» softkey.
HS name
and press the «OK» softkey.
.
Settings
and press the «OK» softkey.
HS Settings and press the «OK» softkey.
Language
and press the «OK» softkey.
Settings and press the «OK» softkey.
HS Settings
and press the «OK» softkey.