Table of Contents
Advertisement
End the first call
You are conducting a telephone conversation.
A second external party is calling you. You hear the call waiting signal.
You end your current call by pressing the talk key. The handset starts ringing
again indicating the new incoming call.
Press the talk key to answer this incoming call.
or
Hold the first call
You are conducting a telephone conversation.
A second external party is calling you. You hear the call waiting signal.
Open the options menu by pressing the «Options» softkey.
Select the menu entry
current conversation is put on hold and you are connected to the waiting
caller.
•
Note
The network usually allows you a few seconds to accept a waiting call.
If you do not respond quickly enough, the calling party will hear a busy
tone.
•
If you have put your other conversation "on hold" then you have a
choice of different actions to undertake. You may switch between the
two conversations (brokering, refer to page 27), you may transfer the
call (refer to page 26) or you may enter into a conference call (refer to
page 27).
Reject a waiting call
You are conducting a telephone conversation.
A second external party is calling you. You hear the call waiting signal
Open the options menu by pressing the «Options» softkey.
Select the menu entry
waiting signal is switched off, the calling party hears the busy tone and your
telephone conversation with your original party continues.
•
Note
Remember to ask your service provider about the availability and any
charges of these call waiting services.
•
Make sure that you have programmed the correct control code for
these call waiting services (refer to page 45).
Making an internal inquiry call
When you are conducting an external call, you may want to make an inquiry call to someone else without ending the original
conversation.
An internal inquiry call is performed entirely in the base station. This means that internal inquiry calls are not depending on the
service offerings of your service provider.
You are conducting an external call and you want to call an internal party
without ending the external conversation.
Accept CW
and press the «OK» softkey. Your
Reject CW
and press the «OK» softkey. The call
Advertisement
Table of Contents
