Base Station Settings - VTech GEMINI User Manual

Base Station settings

Setting the ring volume
You can set the volume of the base station ring tone in 5 levels or switch it off completely.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
Select the menu entry
The current setting is indicated by a tick mark. Select the desired volume level
with the navigation keys (OFF, 1 - 5).
Off
Ring volume 1
Ring volume 5
Confirm with the «OK» softkey. The new volume level is set.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
Setting the ring melody
You can choose between 10 different ring tone melodies.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
Select the menu entry
The current setting is indicated by a tick mark. Select the desired melody with
the navigation keys.
Confirm with the «OK» softkey. The new melody is now set.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
Changing PIN code (Personal Identification Number)
The PIN code is a 4-digit secret number to protect your telephone from unauthorised use.
At the factory, the PIN code is initially set to "0000". It is highly recommended to change this PIN code as soon as possible to your
own personal code!
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
Open the menu by pressing the «Menu» softkey.
Settings and press the «OK» softkey.
BS Settings
and press the «OK» softkey.
Ring tones and press the «OK» softkey.
Ring volume
and press the «OK» softkey.
= no ring tone („do not disturb")
= quietest level (1)
= loudest level (5)
Settings and press the «OK» softkey.
BS Settings
and press the «OK» softkey.
Ring tones and press the «OK» softkey.
Ring melody
and press the «OK» softkey.
Settings and press the «OK» softkey.
BS Settings
and press the «OK» softkey.
Edit PIN
and press the «OK» softkey.