Switch To Another Base Station - VTech GEMINI User Manual

2.4ghz digital cordless phone system

Table of Contents

Press the cancel key for approx. 2 seconds to return to the standby mode.

.....

Switch to another base station

After you have successfully logged your handset on to multiple base stations, you still need to assign the active base station through

which you want to make your phone calls. At any given time, only 1 base station can be the active base station for your handset. The

handset does not automatically find the strongest radio signal and switches to that base station.

Open the menu by pressing the «Menu» softkey.

Select the menu entry

Press the «OK» softkey. The currently assigned base station for your handset

is displayed, e.g.

Select the new base station to which you want to switch to.

Confirm with the «OK» softkey. Your handset is now assigned to the new

base station.

Press the cancel key for approx. 2 seconds to return to the standby mode.

.....

Note

The display only lists base stations to which the handset was previously

logged on.

Language settings for multiple handsets

Be sure to use the same language settings in all handsets. In some cases failing to do so may cause menu texts to be displayed in a

different language than set in the respective handset.

Settings

and press the «OK» softkey.

HS Settings

and press the «OK» softkey.

Select BS

and press the «OK» softkey.

Base station A

Table of Contents