VTech GEMINI User Manual page 39

Select the menu entry
softkey.
Select the contrast level of your choice and press the «OK» softkey.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
Set/modify the emergency numbers
Even when the key lock is on, you can still dial emergency numbers. Your Vtech GEMINI supports up to 4 emergency numbers
which you can freely assign and/or modify.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
Select one of the four emergency numbers which you want to assign/modify
and press the «OK» softkey.
You can now edit the emergency telephone number. Press the
delete the last digit. Press the «Store» softkey to confirm the changes.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
Resetting the handset to factory settings
With this procedure you can restore the handset settings to factory defaults.
Open the menu by pressing the «Menu» softkey.
Select the menu entry
Select the menu entry
Select the menu entry
The display shows entry
The settings in the handset are reset to factory defaults.
Press the cancel key for approx. 2 seconds to return to the standby mode.
.....
The following settings are affected when the handset is reset:
HS Setting Factory Settings
Language English
Ring tone volume High (level 5)
Ring tone melody Melody 1
Voice volume Medium (level 3)
Low batt. warning On
Key click On
Out of range Off
Display contrast Level 4
Log on Base Station A
Handset name "INTERN"
Redial list Empty
Phonebook Empty
Display contrast
Settings
and press the «OK» softkey.
HS Settings and press the «OK» softkey.
Emergency No.
and press the «OK» softkey.
Settings and press the «OK» softkey.
HS Settings
and press the «OK» softkey.
Reset HS and press the «OK» softkey.
Reset HS?
.Confirm with the «Yes» softkey.
and press the «OK»
key you