VTech gz 2404 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. VTech Manuals
  4. Cordless Telephone
  5. gz 2404
  6. Operating instructions manual
VTech gz 2404 Operating Instructions Manual

VTech gz 2404 Operating Instructions Manual

Vtech gz2404: operating instruction
Hide thumbs Also See for gz 2404:
Table of Contents

Advertisement

Quick Links

Download this manual

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink or
swimming pool).
5. Do not place this product on an unstable surface such as a table, shelf or stand.
The product may fall, causing serious damage.
6. Slots and openings in the back or bottom of the Base Unit and Handset are provided
for ventilation. To protect them from overheating, these openings must not be
blocked by placing the product on a soft surface such as a bed, sofa or rug. This
product should never be placed near or over a radiator or heat register. Nor should
this product should not be placed in any area where proper ventilation is not
provided.
7. This product should be operated only from the type of power source indicated on
the packaging. If you are not sure of the type of power supply in your home, consult
your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product where
the cord may have anyone walking on it.
9. Never push objects of any kind into this product through slots in the Base or Handset
as they may touch dangerous voltage points or short out parts that could result in
a risk of fire or electric shock. Avoid spilling liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to
an authorized service facility. Opening or removing parts of the Base or Handset
other than specified access doors may expose you to dangerous voltages or other
risks. Incorrect reassembling can cause electric shock when the product is
subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the risk of fire
or electric shock.
12. Unplug this product from the wall outlet and refer servicing to an authorized service
facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions, as
improper adjustment of other controls may result in damage and often requires
extensive work by an authorized technician to restore the product to normal
operation.
1

Advertisement

Table of Contents
loading

Related Manuals for VTech gz 2404

Summary of Contents for VTech gz 2404

  • Page 1: Important Safety Instructions

    Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
  • Page 2 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Only put the Handset of your telephone next to your ear when it is in normal talk mode.

  • Page 3: Before You Begin

    1. Base Unit 3. AC Power Adapter 5. Battery 7. User’s Manual To purchase replacement battery packs, call VTech Communications Inc. at 1-800-595- 9511. In Canada, call VTech Telecommunications Ltd. at 1-800-267-7377. 2. Handset 4. Telephone Line Cord 6. Belt Clip...

  • Page 4: Getting Started

    Setup Connecting Power to Base Unit Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular tele- phone jack and a standard electrical outlet (110V AC) not controlled by a wall switch. Plug the AC power adap-...

  • Page 5: Check For Dial Tone

    PHONE. You should hear a dial tone. Tone/Pulse Selection Your gz 2404 is preset for tone dialing. See Telephone Operation on page 8 for details. CAUTION: Use only the VTech power supply provided with your telephone. IMPORTANT: FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM: 1.

  • Page 6: Basic Operation

    Handset Features Volume Keys · While on a call, press to raise or to lower the volume. A double beep will sound when you reach maximum or minimum level. PHONE/FLASH · Press PHONE/FLASH then dial the number to make a call. ·...

  • Page 7: Base Features

    Base Features IN USE/CHARGING Light MESSAGE Light · Flashes when a · Flashes when the Handset caller leaves is in use. message in your · Flashes in unison with in- voice mailbox, see bound ringing. Message Wait- · Flashes rapidly when a call ing on page 8 for is on hold.

  • Page 8: Telephone Operation

    6. Press SELECT to save the displayed mode. Message Waiting Your gz 2404 is designed to work with most local and regional telephone service provider is Voice Messaging systems, providing alerts on both the Handset and Base Unit when new messages come in.

  • Page 9: Temporary Tone Dialing

    Telephone Operation You can retrieve your voicemail messages from any telephone. If the indicators remain on after all new messages have been reviewed, you can turn them off manually: 1. Make sure the Handset is off. 2. Press PROG. 3. Press until the screen displays MESSAGES WAITING.

  • Page 10: Telephone Directory

    Telephone Directory This cordless phone can store 50 telephone numbers with names (up to 15 characters for name, 24 digits for number each location). Entries are stored alphabetically. NOTE: Press OFF at any time to exit directory. Store a Number/Name in the Directory 1.

  • Page 11: Edit A Number/Name Stored In The Directory

    Telephone Directory 7. Press to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pattern after the first ring. Choose N (for no) for a normal ringing pattern.

  • Page 12: Delete A Number/Name Stored In The Directory

    Telephone Directory 4. Press SELECT. The screen displays the name and number. The flashing cursor ap- pears at the end of the name. Use Press SELECT to move on to edit the number. Press SELECT to move to edit the Distinctive Ring setting and Animation setting.

  • Page 13: Caller Id Operation

    For each call that comes in, the screen displays the following information between the first and second rings: • Your caller’s name (up to 15 letters are sent by your telephone company). • The caller’s area code and telephone number.

  • Page 14: Dial A Displayed Number

    Caller ID Operation 2. Press SELECT. The screen displays ERASE NO YES ALL and the phone number. 3. Press until ALL flashes, then press SELECT. The screen displays ERASE ALL NO YES. 4. Press until YES flashes. 5. Press SELECT. You will hear a confirmation beep. Dial a Displayed Number 1.

  • Page 15: Ringer Options

    Ringer Options In addition to four traditional ringer options and ringer OFF, your gz 2404 Handset has three popular pre-programmed melodies. Traditional Ring Options Pre-programmed Melodies: “We Will Rock You” (WWRY) By Brian May © BEECHWOOD MUSIC CORPORATION “All the Small Things” (Blink182) Words and Music by Tom DeLonge and Mark Hoppus ©...

  • Page 16: Headset Operation

    Headset which is compatible with the gz 2404. For best results use a VTech 2.5mm headset. To purchase a Headset, call VTech Customer Service at 1-800-595-9511. Once you have a compatible 2.5mm Headset, locate the Headset Jack on the gz 2404 Handset.

  • Page 17: Additional Information

    In Case Of Difficulty If you have difficulties in operating your phone, the suggestions below should solve the problem. If you still have difficulties after trying these suggestions, call VTECH Commu- nications at 1-800-595-9511. In Canada, call VTECH Telecommunications Canada Ltd.
  • Page 18 In Case Of Difficulty You Hear Noise In The Handset, And None Of The Keys Or Buttons Work • Make sure the power cord is plugged in. Common Cure For Electronic Equipment If the unit does not seem to be responding normally, then try to put the Handset in the cradle.

  • Page 19: Maintenance

    Avoid water Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub or shower.

  • Page 20: Warranty Statement

    3. Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech electrical accessories; or 5. Product whose warranty/quality stickers, Product serial numbers plates or electronic serial numbers have been removed, altered or rendered illegible;...
  • Page 21 • If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

  • Page 22: Fcc, Acta And Ic Regulations

    • Consult the dealer or an experienced radio/TV technician for help. FCC Part 68 and ACTA If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If...

  • Page 23: Connection And Use With The Nationwide Telephone Network

    You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product.
  • Page 24 If you do, please keep three things in mind: a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn’t work.

  • Page 25: The Rbrc Seal

    RBRC centers. Please call 1-800-8-BATTERY disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC is a registered trademark of Rechargeable Battery Recycling Corporation.

  • Page 26: Technical Specifications

    Technical Specifications FREQUENCY CONTROL Crystal controlled PLL synthesizer TRANSMIT FREQUENCY Base: 2410.2 - 2418.9 MHz Handset: 912.75 - 917.10 MHz RECEIVE FREQUENCY Base: 912.75 - 917.10 MHz Handset: 2410.2 - 2418.9 MHz CHANNELS 30 Channels NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC and IC.
  • Page 27 VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd. 7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2004 for VTECH TELECOMMUNICATIONS LTD.
  • Page 29 AND THE US VIRGIN ISLANDS. NO DELIVERY TO PO BOXES OR APO ADDRESSES. METHOD OF PAYMENT: DO NOT SEND CASH CHECK MASTERCARD AMERICAN EXPRESS Checks and Money Orders should be made payable to VTech Communications, Inc. BILLING INFORMATION CREDIT CARD # _________________________________________________________ EXPIRATION DATE ____________________ SECURITY CODE* ____________________ CARDHOLDER’S SIGNATURE _______________________________________________...

  • Page 30: Table Of Contents

    Removable Handset Plate and Base Plate ... 5 Basic Operation ... 6 Handset Features ... 6 Base Features ... 7 Telephone Operation ... 8 Handset Ringer Style/Battery Save ... 8 Set Date and Time ... 8 Set the Dial Mode ... 8 Message Waiting ...

Table of Contents