Mute; Call Waiting; Temporary Ringer Silencing; Temporary Tone Dialing - VTech CS6429 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but
the other party cannot hear you.
During a call, press MUTE/
1.
handset displays MUTED for a few seconds and MUTE
appears until the mute function is turned off.
Press MUTE/
2.
The handset screen temporarily shows
MICROPHONE ON.

Call waiting

When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
/FLASH to put the current call on hold and take the new call.
• Press
/FLASH at any time to switch back and forth between calls.
• Press

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset without disconnecting the call. The next call rings normally at the
preset volume.
To silence the ringer:
When the telephone is ringing, press OFF/
handset, RINGER MUTED and

Temporary tone dialing

If you have dial pulse (rotary) dialing service only, you can temporarily switch
from dial pulse to touch-tone dialing during a call.
1. During a call, press
2. Use the dialing keys to enter the number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.
DELETE
again to resume the conversation.
DELETE
.
TONE
on the handset. The
or MUTE/
CANCEL
show on the screen.
19
MUTED
3:15 12/25
MUTE
PM
on the
DELETE