Chapter 1 Software Requirements; How To Use This Document - Fujitsu M10 Product Notes

How to Use This Document

This document supports all models of SPARC M10 Systems. Depending on the server
you use, read the related items listed in the following table.
Chapter titles in this document

Chapter 1 Software Requirements

Chapter 2 XCP 2240-Related Information
Chapter 3 Information on Software
Chapter 4 Information on SPARC M10-1 Hardware
Chapter 5 Information on SPARC M10-4 Hardware
Chapter 6 Information on SPARC M10-4S Hardware
Chapter 7 Information on PCI Expansion Unit Hardware
Chapter 8 Contents of Revision of Documentation
The information about firmware and software, which are described in
Chapter
related to a specific model. In such case, the applicable model name is indicated.
The information about hardware devices is provided in
Chapter 6
described in all chapters describing hardware. Therefore, when you check the
hardware information about multiple models, you will find that some contents are
duplicated in some chapters.
Check the information on the PCI expansion unit
expansion unit is introduced.
Contents of revision of documents (Chapter 8) are provided in each document. Check
whether the contents of your document have been revised.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
x
2, and Chapter 3, is common to all models. Some of the information are only
separately for each model. The contents common to all models are
SPARC M10-1 SPARC M10-4
x x
x x
x x
x
x
x (when x (when
introduced) introduced)
x x
Chapter
(Chapter 7) when the PCI
SPARC M10-4S
x
x
x
x
x (when
introduced)
x
Chapter 1,
4, Chapter 5, and