Fujitsu M10 Product Notes page 75

Table 3-5 Problems that might occur with XCP 2240 and workarounds (continued)
SPARC M10-
RTI No. 1 4 4S Description Workaround
information
XSCF> showsmtp
Mail Server:
Port: 25
Authentication Mechanism: none
Reply Address:
- E-mail notification function setting
[Example] To display the e-mail report
setting information
XSCF> showemailreport
E-Mail Reporting: disabled
4. Execute the restoreconfig(8) command
to restore the XSCF setting information.
5. After restoring the XSCF setting
information with the restoreconfig(8)
command, execute the command below
to implement a reset using the setting
values confirmed in step 1. Or, initialize
the time difference.
- Restoring setting for power operation
at power recovery
[Example] Not powering on at power
recovery
XSCF> setpowerschedule -a -c
recover=off
- Restoring ASR function (Service Tag)
enable/disable setting
[Example] Setting to enable
XSCF> setservicetag -c enable
- Restoring PPAR DR feature
enable/disable setting
[Example] Setting to disable
XSCF> setpparmode -p 0 -m ppar_dr=off
- Restoring configuration and setting
changes of power supply interlocking
group and enable/disable setting of
power supply interlocking function
[Example] Restoring setting information
based on management file saved to FTP
server
XSCF> setremotepwrmgmt -c config
"ftp://server[:port]/path/file"
[Example] Enabled when saving
XSCF> setremotepwrmgmt -c enable
- Initializing time difference between
XSCF and hypervisor of each PPAR
Chapter 3 Information on Software 61