Fujitsu M10 Product Notes page 23

Table 1-7 Existing XCP firmware versions and support information (continued)
XCP version Main support information
XCP 2052 - Support of the AES algorithm encryption function for the
SNMP agent function
- Support of different memories in the chassis
XCP 2051 Improvement of XCP firmware defects
XCP 2050 Support of the direct I/O function for the PCI expansion
unit (SPARC M10-4S)
XCP 2044 Support of the direct I/O function for the PCI expansion
unit (SPARC M10-1/M10-4)
XCP 2042 Support of the crossbar box (configuration of up to 16 BB)
XCP 2041 Support of the PCI expansion unit
XCP 2032 Improvements related to the Oracle VM Server for SPARC
software
XCP 2031 Support of SPARC M10-4S (configuration of up to 4 BB)
XCP 2013 Improvement of XCP firmware defects
XCP 2012 Support of SPARC M10-1/M10-4
Note - When the CMU firmware version is updated, turn off the power of the physical
partition and then turn it on again to complete the CMU firmware update. For details on
firmware update, see "16.1 Updating the XCP Firmware" in the Fujitsu M10/SPARC M10
Systems System Operation and Administration Guide.
Note - The CMU firmware version may differ with the XCP version.
For example, in XCP 2042, the XSCF version is 02.04.0002, whereas the CMU version is
02.04.0001.
CMU version
02.05.0002
02.05.0001
02.05.0000
02.04.0004
02.04.0001
02.04.0001
02.03.0001
02.03.0001
02.01.0003
02.01.0002
Chapter 1 Software Requirements 9