Select SERIAL PORTS from the System Setup menu to display the Serial Port
screen. The Serial Port screen allow you to specify settings for the serial
communication ports on the UPS. Figure 8---14 shows the Serial Ports screen. For
detailed information about configuring the serial ports, refer to Chapter 12, "Serial
Communications."
Use the
or
pushbuttons to make the change. When finished making changes, use the
or
pushbuttons to highlight SAVE and the
To complete the save function and return to the Setup Menu screen, select the
pushbutton.
PORT
COM1
8--10
or
pushbuttons to highlight the setting to be changed. Use the
SERIAL PORTS
BAUD
PARITY
9600
NONE
Figure 8 ---14. Port Setup Screen
or
pushbuttons to select YES
DATA
STOP
8
1
Powerware 9330 (10 kVA- -40 kVA) Installation and Operation
SAVE
YES
164201300 REV. G 061502