Starting And Stopping The Ups; Using The Control Panel; Figure 7. Ups Control Panel - Powerware 9315 Operation Manual

This chapter describes how to use the Control Panel to start and stop the
UPS.
NOTE:
Before starting the UPS, ensure all installation tasks are complete and a preliminary
startup has been performed by authorized service personnel. The preliminary
startup verifies all electrical interconnections to ensure the installation was
successful and the UPS system operates properly.

Using the Control Panel

The Control Panel (see Figure 7) is inside the right door of the UPS cabinet.
Although the Control Panel appears easy to use, you should read these
instructions and thoroughly understand how the controls work before attempting to
use them.
CAUTION:
Incorrect use of the power controls on the Control Panel can cause a loss of
power to your equipment.
Powerware 9315 (200 kVA ---300 kVA) Operation
164201036 Rev. D 041500

Starting and Stopping the UPS

Figure 7. UPS Control Panel

15