Starting And Stopping The Ups; Using The Control Panel; Figure 4-1. Ups Control Panel - Powerware 9315 UPS Operation Manual

Chapter 4
This chapter describes how to use the Control Panel to start and stop the UPS.

4.1 Using the Control Panel

The Control Panel is inside the right−hand door of the UPS cabinet (see Figure 4-1).
Although the Control Panel appears easy to use, you should read these instructions and
thoroughly understand how the controls work before attempting to use them.
9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev G www.powerware.com
EATON Powerware
®

Starting and Stopping the UPS

NOTE Before starting the UPS, ensure all installation tasks are complete and a
preliminary startup has been performed by authorized service personnel. The
preliminary startup verifies all electrical interconnections to ensure the installation
was successful and the UPS system operates properly.
Incorrect use of the power controls on the Control Panel can cause a loss of power to the
protected equipment.

Figure 4-1. UPS Control Panel

C A U T I O N
4−1