Supervisory Contact Module; Figure 22. Supervisory Contact Module - Powerware 9315 Operation Manual

Supervisory Contact Module

An optional Supervisory Contact Module (SCM) establishes an interface between
the UPS manufacturer's equipment and the customer's monitor. This interface
allows the customer to monitor operational status of the UPS equipment. A
maximum of two monitoring accessories (RMPs, RIMs, or SCMs) can be installed.
See Table 1 for the number of accessories permitted. Figure 22 shows the SCM,
input connections on TB1, and output connections on TB2.
TB2
The SCM provides signals for the following indications:
·
SYSTEM NORMAL
·
NO REDUNDANCY
·
ON GENERATOR
·
BYPASS NOT AVAILABLE TB2---10 through TB2---12
·
ON BATTERY
·
UPS ALARM
·
ON BYPASS
·
SHUTDOWN IMMINENT
Refer to Powerware Plus Installation manual, Chapter 12, for TB2 contact
configurations.
Powerware 9315 (200 kVA ---300 kVA) Operation
164201036 Rev. D 041500

Figure 22. Supervisory Contact Module

TB2---1 through TB2---3
TB2---4 through TB2---6
TB2---7 through TB2---9
TB2---13 through TB2---15
TB2---16 through TB2---18
TB2---19 through TB2---21
TB2---22 through TB2---24
37