Using The Menu Options; Figure 10. System Meters Screen - Powerware 9315 Operation Manual

Using the Menu Options

The UPS menus allow you to display data in the information area to help you
monitor and control UPS operation. The following menus and options are
available:
·
Meters
·
Events
·
Statistics
·
Graphics
·
Setup
Figure 10 shows the LCD screen as it appears when you first start the UPS. The Meters
menu is displayed in the menu box, with the System option highlighted. In the
information area, the system meters show their current readings.
System Normal
Alarm:
Notice: None
Battery
Percent
100%
Meters
System
Load Amps
Meters
Figure 10. System Meters Screen (Typical for Powerware 9315 300 480/480V Unit)
The Input area shows the phase-to-phase voltage, frequency, and phase current of the
incoming utility, followed by the KVA, KW, and power factor measurements. The output
area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery
area displays the DC voltage (V) and the DC current (I).
Powerware 9315 (200 kVA ---300 kVA) Operation
164201036 Rev. D 041500
Displays UPS performance meters for the system or critical load.
Displays the list of Active System Events and a historical log of
system events.
Displays statistical information about UPS operations for the
battery, load, or line.
Displays a real-time graphic representation of the flow of current
through the internal UPS components.
Allows you to configure the UPS communications port and set
the date and time for the timestamp.
Uninterruptible Power System
None
VAB
480
IA
480
KVA
399
VAB
480
Events Statistics Graphics Setup
Input
VBC VCA FREQ
480 480 60.0
IB IC
480 480
KW PF
379 0.95
Bypass
VBC VCA
480 480
04 MAY 1997 14:23:45
Output
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC IN
361 361 361 000
KVA KW PF
300 240 0.80
Battery
V I
540 000
23