Operation; Turning The Ups On; Starting The Ups On Battery; Turning The Ups Off - Powerware 5119 User Manual

C H A P T E R 3
O
PERATION
This section describes:
:
:
:
:
:

Turning the UPS On

After the UPS is connected to a power source, it conducts a self-test and
enters Standby mode. To turn on the UPS, press the On button on the
front panel (shown in Figure 10). The Power On indicator illuminates
indicating that power is available from the rear receptacles.

Starting the UPS on Battery

To turn on the UPS without using utility power, press and hold the
On button for three seconds. When the UPS starts on battery, it does
not conduct a self-test to conserve battery power.

Turning the UPS Off

To turn off the UPS, press the Off
Powerware 5119 User's Guide
®
Turning the UPS on and off
Starting the UPS on battery

Standby mode

The UPS front panel and LEDs
Initiating the self-test
:
www.powerware.com
11