Remote Monitor Panel; Figure 20. Remote Monitor Panel - Powerware 9315 Operation Manual

Remote Monitor Panel

As an option, you can install Remote Monitor Panels (RMPs) to monitor the
operation of the UPS system from virtually any location within your facility, up to
500 feet from the UPS. Each RMP contains backlit status indicators and a local
horn. You can flush-mount or surface-mount an RMP on a desktop, wall, or
wherever you have a serial interface line. A maximum of two monitoring
accessories (RMPs, Relay Interface Modules (RIMs), or Supervisory Contact
Modules (SCMs)) can be installed. See Table 1 for the number of accessories
permitted. Figure 20 shows an RMP .
Remote Monitor Panel
2
—
—
1
1
—
Powerware 9315 (200 kVA ---300 kVA) Operation
164201036 Rev. D 041500

Figure 20. Remote Monitor Panel

Table 1. Optional Monitoring Accessories
Number and Type of Accessories Permitted
Relay Interface Module Supervisory Contact Module
—
2
—
1
—
1
—
—
2
—
1
1
33